Results from ArchivedDocumentation/ITB/ITB050 web retrieved at 01:25 (GMT)
Introduction An Information service facilitates the usability of a resource by publishing status information about the resource. The Information Service can be characterized ...
nop OSG CE Authorization Introduction The Authorization mode determines who can access your resources and how. OSG supports three of the GUMS authorization scenarios ...
Verifying The VOMS Installation Verifying the Success of the VOMS Installation If all the required certificates were in place prior to the pacman installation, a ...
ITB 0.5.n GUMS Installation and Admin Guide Introduction User Management System (GUMS) is a Grid Identity Mapping Service. Identity mapping is necessary when a site ...
nop OSG VOMS 0.5.n Installation Instructions Introduction The Organization Membership Service (VOMS) has three main parts: MySQL database which is a persistent ...
Sourcing $OSG GRID/setup.sh : The First Job of Any Job Running source $OSG GRID/setup.sh : The First Job of Any Job The first command any job should execute after ...
nop VOMS Known Problems VOMS Known Problems When adding to the list, please assign it to the proper category and include your name and the date you entered it. ...
VOMS Shutdown Guide In VDT 1.6.1 and later, all services ( /etc/init.d , /etc/xinetd.d , cron ) should be turned on/off using the $VDT LOCATION/vdt/sbin/vdt control ...
nop Simple Test of the CE Node Simple Test of the CE Node (using local grid mapfile) Set up your credentials The first step is to configure the CE to allow access ...
Enabling a VOMS VO the voms admin command Enabling a VOMS VO the voms admin command Several things have to be done to actually enable your VO to begin accepting ...
Installing OSG VOMS Services Installing OSG VOMS Services Installation user Must be done as root. Installation package After installing pacman: cd PACMAN DIR ...
prima authz.conf vomsdir and verifyAC Behavior When the verifyAC attribute is set to 'true' (default), it checks the directory specified by the issuerCertDir attribute ...
Tomcat is very hungry,it likes to eat memory. There are tomcats now in the canonical VOMS server installation and the canonical GUMS server installation, and soon ...
Introduction This is a minimal set of executables that need to be made available to the worker nodes in a Compute Element. Note that it contains some packages that ...
StevenTimm 04 Dec 2006 This page tracks the Site and Fabric issues that were raised at the August 2006 consortium meeting best practices session. I have recently ...
nop Generic Information Providers (GIP) Introduction The Open Science Grid (OSG) Generic Information Provider (OSG GIP) has been developed to enable LCG OSG interoperability ...
nop OSG VOMS Installed Software VOMS Installed Software When you install the VOMS node, it comes with quite a bit of software. It includes: Globus, which includes ...
Planning Discussions for OSG 0.6.0 Introduction This section is included for historical purposes it contains preliminary discussions that led to this release of ...
VOMS Pre Installation Checklist Certificates These instructions assume that you already have the necessary certificates on this host. Although it can be done as ...
nop VOMS Changes For This Release VOMS changes for this release CRL updates The CRL update process that ran as a daemon (/etc/init.d/edg crl upgraded) has been converted ...
Configuring VOMS the configure voms script Configuring VOMS the configure voms script The $VDT LOCATION/vdt/setup/configure voms script has been provided for ...
Configuring Local Storage This document describes how a CE administrator can configure the OSG attributes, including ones referencing "CE storage", during the installation ...
nop Configuring the OSG Attributes Configuring the OSG Attributes At this point, there are several OSG attributes (environmental variables) that need to be established ...
nop OSG CE Site Administrators Guide CE Site Adminstrator Overview This section is intended to describe the information you will need available to configure your ...
nop MonALISA The (Monitoring Agents in A Large Integrated Services Architecture) system provides a distributed service for monitoring, control and global optimization ...
OSG Client Installation Guide The OSG ITB Release uses the VDT for the client installation. You do not need install the client package as root . Use the following ...
Guide to Generic Information Provider (GIP) Configuration Questions This page is a guide to the questions that configure osg gip.sh asks. The goal of this page is ...
nop Introduction GridCat is a high level grid cataloging system using status dots on geographic maps as well as a catalog of participating sites. The status dots ...
Describes the recommended hardware for the current OSG Integration Testbed. From StevenTimm's talk on Learned Best Practices. Compute Element head node At ...
Testing access to your VO's VOMS server Testing access to your VO's VOMS server There are several functions on the grid that access your VOMS VO: 1. voms proxy ...
nop Some gums.config Examples Introduction This page illustrates some possible authorization configurations possible in the gums.config file. To minimize confusion ...
nop edg mkgridmap Troubleshooting Guide This document is intended to provide some assistance in troubleshooting problems related to use of the edg mkgridmap script ...
nop OSG Resource Name Each OSG resource needs a unique name by which services and resources may refer to the resource. This name will be displayed on the Site Catalog ...
Introduction This section provides recommendations for the definitions and environment variables for the Local Storage accessible to Compute Elements on OSG. It covers ...
nop OSG Installation Assistance Assistance during the installation If you have questions during the installation of this software, the first line of support is your ...
Describes recommended best practices for OSG site monitoring and metrics. From StevenTimm's talk on Learned Best Practices. Monitoring Packages in the OSG There ...
nop OSG CE 0.6.n Installation Instructions, Install as root, use Condor, do not have an SE This document is intended for administrators responsible for installing ...
nop OSG CE Pre installation Checklist CE Pre installation Checklist Add instructions/recommendations on what you can do as root vs nonroot and why to choose root ...
About the OSG APP Storage Area The OSG APP storage agea holds VO wide software installations. Relative paths must be consistent between gatekeeper and worker nodes ...
Configuring the Public Key Infrastructure Getting Certificates Read https://twiki.grid.iu.edu/twiki/bin/view/Documentation/CertificateWhatIs if you don't know ...
nop CEMon Installation / Activation CEmon The (CEMonitor) service is responsible for providing information coming from the Computing Element (CE) and is being implemented ...
Configuring the Public Key Infrastructure Configuring the Public Key Infrastructure Minimally, you will need a host certificate and private key to identify your ...
nop OSG CE Pre installation Checklist CE Pre installation Checklist System or Cluster Already Setup including a functioning batch system It is assumed that your ...
nop OSG CE Site Administrators Guide CE Site Adminstrator Overview This section is intended to describe the information you will need available to configure your ...
nop OSG CE Firewalls Introduction Grid components are distributed throughout the network, and services such as gatekeepers and data movement utilities are required ...
Sample Output From configure osg.sh ################# Configuration for the OSG CE Node ...
nop Monitoring Setup Old Monitoring Setup Old Configure MIS CI For OSG ITB 0.5.1/VDT 1.4.0 and greater, MIS CI is no longer part of the OSG CE package and there ...
nop ArchivedDocumentation/ITB/ITB050 Web Preferences The following settings are web preferences of the ArchivedDocumentation/ITB/ITB050 web. These preferences ...
ITB Release 0.5 Web Home Introduction This is a release description for the OSG ITB 0.5 series of Integration testbed deployments. ITB 0.5.2 site validation ...
General Pacman Guide for OSG Installing and Setting Up Pacman Pacman is a package management tool that allows you to define, install, and configure software. Different ...
Number of topics: 50
Edit | Attach | Print version | History: r2 < r1 | Backlinks | Raw View | More topic actions
Topic revision: r2 - 28 Mar 2005 - 09:40:13 - TWikiContributor
Common links
- Main Web
-
OSG TWiki home
- Welcome to TWiki
- Technical Doc home
- Install guides?
- Opensciencegrid.org
- I can't find it!?
OSG Activities & other TWiki webs
- Accounting
- ArchivedDocumentation
- Auditing
- Blueprint
- CampusGrids
- CommunitySupport
- Council
- Deployment
- Documentation
- EdgeServices
- Education
- Engagement
- InformationServices
- Integration
- Interoperability
- Main
- Management
- MeasurementsAndMetrics
- MonitoringInformation
- NetworkTechnicalGroup
- OSGRA
- OSGReports
- Operations
- ReleaseDocumentation
- ResourceSelection
- Sandbox
- Security
- SiteCoordination
- SoftwareTools
- Storage
- SupportCenters
- TWiki
- Troubleshooting
- VO
- VirtualOrganizations
Meta-TWiki links
-
List all webs
-
Create New Topic
-
Index of ArchivedDocumentation/ITB/ITB050?
-
Changes?
-
Notifications
-
Preferences?
-
TWiki users
-
Twiki groups
 |
|
Copyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback